Pair of stylish black 30 litre Junior Flash panniers to fit Hepco and Becker pannier frames (fitted as OE to many models). These are the classic Hepco and Becker pannier design.

• Silver painted cover can be removed for colour matching to your bike
• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available

These are a great value pannier set which are quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Their discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with aluminium lock adapter plates and two lock keys. See LUA70129 and LUA70128 for Guzzi badges to fit these panniers

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Pair of stylish black 40 litre Junior Flash panniers to fit Hepco and Becker pannier frames (fitted as OE to many models). These are the classic Hepco and Becker pannier design.

• Silver painted cover can be removed for colour matching to your bike
• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available
A crash helmet will fit in these 40 litre panniers

These are a great value pannier set which are quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Their discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with aluminium lock adapter plates and two lock keys. See LUA70129 and LUA70128 for Guzzi badges to fit these panniers

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Stainless steel front engine mounting bolt kit made specially for Gutsibits. Kit contains one long engine M12 x 1.25 bolt, one M12 half nut, one M12 crinkle washer and two standard M12 washers - all in A2 stainless steel

Made especially for Gutsibits the original bolts are prone to seizing in place so we recommend replacing with this quality stainless part. Also known as Guzzi ref. 03429500, 14429505

 Sorry, this part is no longer available.

14429500-z 14429500 GU14429500 14 42 95 00
 1442 9500 1442.9500 14.42.95.00

Brembo PS 13 handlebar mounted clutch master cylinder, supplied complete with lever.

 This part is available by special order, request a quote

Pair of triangular side panels with fixings to fit all Tonti frame models with slotted side panel lugs under the seat

This is a kit, the fixings need bending and glueing to the sidepanel before the side panels can be fitted. The panels are GRP, fitting instructions are provided in German

 This part is available by special order, request a quote

Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 3 Ohm 12 volt coils and can be used to replace points or Motoplat ignition on models with Saprisa charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.

2 year warranty on Sachse ignition kits

Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA31165

 This part is available by special order, request a quote

Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.

This clutch upgrade has the following advanges over the old two plate clutch:

• Reduction in flywheel and clutch weight of approx. 1KG
• Improved acceleration
• Smoother gear changes at high RPM
• Quicker engine decelleration
• Reduction in engine vibration as the clutch assembly is (this is not possible with the original clutch)
• Lighter handlebar clutch lever action
• More precise clutch engagement and disengagement.
• More progressive clutch engagement.
• Increased ability to handle higher torque and horsepower.
• Lower clutch disk wear (reduced maintenance)
• Fewer parts (no intermediate plate, no second friction plate) to wear out
• Ease of assembly - gearbox can be fitted to engine without centering of the clutch disk.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal

Make your Guzzi stand out from the crowd!

 This part is available by special order, request a quote

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Lightweight 5mm battery plate in a silver finish, supplied with countersunk M8 screws

This is an upgrade to the standard steel plate, perfect for your Tonti framed special (it will also fit Cali 1100 and Cali EV based specials. On some models you may need to enlarge the cut out for the speedo cable

 Availability varies on this part, check availability

14418200-z 14418200 GU14418200 14 41 82 00
 1441 8200 1441.8200 14.41.82.00

Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models

Make your Guzzi stand out from the crowd!

 This part is available by special order, request a quote

 10430830 GU10430830 10 43 08 30
 1043 0830 1043.0830 10.43.08.30